Book authors seem to devote a lot of time to writing books about locomotives. Indeed every class of diesel has at least one entire book about it, sometimes several.

But for those of us who are fans of EMUs the local bookshop is something of a desert. However, if you look hard enough there are a number of good books available, even though it often means buying second hand.

I’ve put some details below of the books which I have in my collection, which I hope will be of interest to anyone researching the subject area. If you have any suggestions for other books to add to the list, feel free to email me.

British Rail Fleet Survey 10: Third Rail dc Electic Multiple Units by Brian Haresnape and Alec Swain, ISBN 0711017603.

The British Rail Fleet Survey series is probably the definitive series on the history of British Rail motive power between the modernisation plan and the late eighties. Whereas most other books I’ve listed here are mainly photograph based with a small amount of text, the books in this series have a good amount of textual content.

The 3rd rail EMU book starts with about thirty pages on the general history of third rail EMUs, then follows with two to four pages for each class which ran on BR during the eighties (the most recent class described are the 442 5-WES units). Each chapter (one per class) describes the history and some technical details of the units along with a number of (black and white) photographs and, occasionally, a simple engineering drawing. Liveries cover a selection of those carried during the units careers.

This book covers both southern and non southern 3rd rail units, as well as the dual voltage classes 313 and 319. Book 11 in this series by the same authors covers overhead EMUs, ISBN 0711019029.

Motive Power Recognition 3: EMUs by Colin J. Marsden, ISBN 0711015694

This series of books was one of my must haves during my spotting days in the eighties with the A5 format making them useful pocket references. The EMU book covers all classes of EMU which where active on BR during the mid-eighties. All photos are in black and white with units being in liveries which where current at the time of publication (ie mainly blue and grey).

Primarily pictorial in nature the book has, generally, two to four pages for each class starting with basic technical data followed by well captioned pictures. As befits the title of the book the captions mainly refer to the distinguishing details between each class, and vehicles within each class. The shots of individual cars make useful references for the modeller.

British Railway Pictorial: First Generation Southern EMUs by Kevin Robertson, ISBN 0711030871

With the electrification of the southern railway system starting over a hundred years ago (and, indeed, before the formation of the southern railway) you could spend a long time debating what constitutes a ‘first generation’ EMU. For the purposes of this book it is anything up to and including Mk 1 based units, with the exception of the earliest types.

The book starts with a listing of the various types of EMU stock, but again there is nothing listed before 1914. The earliest EMUs were a varied collection of converted coaching stock and there are few photographs of them around, so maybe this omission can be forgiven.

Organised in roughly chronological order this A4 format book is a collection of black and white photographs illustrating the various types, usually with three photographs per page. Most units are in BR green livery.

Southern Electric by John Glover, ISBN 0711028079

This book is a revised edition of the books of the same title by G. T. Moody, the first edition of which was published in 1957. It gives the definitive history of the electrified southern region from it’s earliest days to the late nineties.

Whilst not strictly a book ‘about’ EMUs its content will surely be of much interest the the EMU enthusiast. In A4 format with many illustrations (in black and white) it covers the history of each electrification scheme and much more besides.

Southern Electric Slam-Door Stock: The Final Years by Roger Palmer, ISBN: 0711031088

The content of this photograph based book accurately reflects it’s title, it covers the remaining slam door stock running on Network Rail in the early 2000s. In landscape format with one photo per page, and every shot in colour, it covers the gamut of privatisation liveries to be found at that time.

Captions concentrate on details of the location and service with very little about the units themselves other than the numbers. One neat touch is the picking out of the location in bold text which I found helpful when flicking through the book.

A Southern Electric Album by Michael Welch, ISBN 1854142704

Another photographically based book but one which is distingished by it’s detailed captions which show the author has great knowledge of both the locations, the units and the services. In a slightly smaller than A4 format and with every picture in colour the book covers not only Emus but also has a few shots of 3rd rail locomotives including one of the 20002 prototype.

Organised in geographical order, starting in the west and progressing eastwards images show a wide selection of ‘first generation’ units in both BR green, all over blue and blue-grey liveries.

Southen DEMUs of Michael Welch, ISBN 1854142879

Whilst not strictly and EMU book, the southern DEMUs where effectively EMUs with diesel engines so I feel this book is worth covering here. Compiled and written by the same author as the previous title, this is in the same style with a similar depth to it’s captions, often covering the entire history of the unit depicted.

Again this book is fully in colour and whilst concentrating on green, blue and blue-grey liveries it also has a few images in Network SouthEast and privatised liveries.

My first assumption was that it would require some complex wiring and a DPDT switch, but I chose to search the internet first for a definitive answer. I found rumours about using a revering loop module but nothing in detail. I couldn’t see how a reversing loop module would work, but then I don’t understand how they work as reversing loop modules, but I figured it was worth some experimenting.

Below is the technicolour diagram of what I ended up with.

The blue and green wires show the normal ‘two wires’ from the command station/controller. These are wired to either side of the crossing as they would be normally with blue to one rail and green to the other.

The short red lines show where an insulating joint is needed either side of the crossings frogs.

The inputs of the reversing module (I’ve shown a Lenz LK100 here, but another make would work equally well) are connected to the ‘two wires’ from the command station. It doesn’t matter which wire connects to which terminal, the module will switch them as necessary.

The outputs from the LK100 are in turn connected to the crossings frogs. Again it doesn’t matter which output goes to which frog, just as long as the frogs are insulated from neighbouring rails.

With my crossing wired as above when I run a train over the crossing there is a ‘click’ from the relay as the LK100 switches polarity and the train runs across the track completely unhindered.

PS. The diagram assumes that both the crossing tracks have the same orientation, ie neither is part of a reversing loop or figure of eight style layout. If so you’ll need to make some modifications, I suspect putting another reversing loop module over the other rails of the crossing (and inulating them) or on one or more approach roads.

A few years later, when everybody was fed up with waiting, and Dapol where looking for a new model
to add to their range they decided to produce the 66 which Bachmann appeared to have given up on.

Later that year Dapols baby was finished, but in the meantime, Bachmann had been putting in overtime on their 66, which was finished a few months later.

Among Dapols product announcements for the following years where a class 150, class 03 and Stanier coaches. Weeks later Bachmann announced a class 150, class 04 and Stanier coaches in their range. Dapol wisely gave way to the larger company and changed their proposed product range. They also went into stealth mode and secretly produced a Voyager.

But as soon as the Dapol model was on sale, Bachmann announced that they already had a model Voyager in an advanced stage of development. Given that Bachmanns development cycle is usually at least 18 months, and they have a habit of pe-announcing every model, why would they have a model Voyager already in development?

Dapol appear to have taken this announcement as an act of revenge. They had spent the effort on their Voyager and in a few months there would be a Bachmann copy on the shelves. So they again went into stealth mode and produced a 9F, a model which Bachmann had already announced themselves.

If Bachmanns Voyager was an attempt at revenge, it seems to have massively backfired on them. Their Voyager is still unavailable twelve months later. There is still no sign of their 9F, but Dapols model is due to hit the shops within a month.

Bachmanns actions look like a large company metaphorically beating it’s chest to scare off a small upstart. But all it has done is given Dapol a chance to prove that being smaller makes them nimbler. They can produce a model on schedule. They can produce a model in half the time. That they tackle Bachmanns head on and come out on top.

All this duplication is a sad waste of development resources. A model locomotive costs about £70,000 to develop, so the N gauge world has lost nearly a quarter of a million pounds in development money, not to mention the three alternative models which would have been produced instead.

But it does make for a fascinating spectacle for the casual observer. A true David versus Goliath battle, with David appearing to win every round.

So, how will Bachmann try to regain the upper ground? Will they try and copy another Dapol model?. Will they try to arrange some kind of truce? Will they also go into stealth mode when producing new models? Or will they do what modellers have been screaming at them to do: dig out their Gantt charts, announce realistic release dates and stick to them?

Indeed when Eurotunnel wanted to create a scale model of the terminals at each on of the Channel Tunnel for display at Folkestone prior to the actual construction it was Chris who was hired to create much of the rolling stock for the layout. If you are very lucky you may even find some of the wagon kits available on ebay to this day.

He recently made available a DVD displaying a selection of his models and he has now created a website detailing his range of products and services, along with a little of his history. If you’ve never seen one of his models the close up photographs on the site are well worth looking at. Read more at cjmmodels.co.uk.

In this issue is a six page interview with Graham Hubbard and Dennis Lovett of Bachmann.  One of the quotes which grabbed my attention was this one from Hubbard on the subject of duplication, “The UK market for models is small compared to other world markets and with so many options available to manufacturers then it clearly is stupid to produce two class 08s, rebuilt ‘Royal Scotts’ and ‘N’ gauge Voyagers.”.

So, which company was it that anounced a Class 150 after Dapol had announced theirs? Similarly with the Class 04 (after Dapols class 03), Stanier coaches and Voyager? Bachmann claimed last Christmas that they decided to continue development of the Voyager because it was already well developed by the time of the Dapol models release at last years Warley exhibition, yet the model is not expected to arrive until this Christmas. In other words, Bachmann have wasted twelve months development on a model which we already have (from Dapol) when they could have invested that time and money into something new.

On a brighter note there was a comment which brings me a lot of hope, as a southern region modeller. In response to a readers question about whether the ‘OO’ 4-CEP will ever be produced in ‘N’ gauge, “We will duplicate everything we do in ‘N’ and ‘OO’. This could be ‘N’ led, or ‘OO’, but it won’t all happen overnight. It could be ten years before we see it, but if we’ve got all the research we might as well use it.” That should give me something to look forward to in my retirement then (and I’m only 37!)

The body is easy to remove - insert a thin screwdriver or finger nails either side and the chassis just drops out. You will now see the circuit board atop the chassis. We will do the conversion by removing the two coils (labelled L1 and L2) and soldering the decoder in their place. There is space to put the decoder in the guards compartment (on the right in the photos).

Start by removing the two coils with a small pair of clippers.  Remove the yellow, blue and white lighting wires from the decoder and cut the other wires to length, the red and black being the shorter pair (see the photos). Now solder the red, black, orange and grey wires as shown in the photos.

All that’s left is to place the chassis on the programming track to test and programme as usual.

XTrkCad offers no less than four methods of creating curves. I’ve described them all below, but you’ll probably find one or two that you prefer and stick to them. Don’t worry too much about making your curves perfect first time. Later I’ll show you how to edit them, a technique which is useful for fine tuning them.

The Create Curve button is on the button bar to the right of the Create Straight button. The icon changes to represent which of the four methods is currently selected. To change the method, click the down arrow to the right of the button and select from the list. As with the Create Straight button, click the Create Curve button to select it.

Create Curved Track From End-Point: Click on the track end from which you want to start, and drag the mouse as though you where continuing in a straight line as shown.

Release the mouse and two red arrows will appear at the end point. Click and drag on the arrows to adjust the length and angle of the curve. Release the mouse to fix the curve.

Create Curved Track From Tangent: Click on the track end point and drag the mouse at a right angle to it.

The distance of the mouse from the track represents the radius of the curve you are creating. Release the mouse and you will see a line with two red arrows. Click and drag the red arrows to adjust the length of the track.

Create Curved Track From Center: This is effectively the opposite of the previous method. Click and drag from the centre point of the curve to where you want the end to be. Release the mouse.

Click on the red arrows, and drag to adjust the length of the curve. This method would be useful for, for example, creating curves at the end of the baseboard from the front of the layout to a hidden siding behind. Just use the midpoint of the baseboard as the starting point.

Create Curved Track From Chord: Click on an end point, drag to were you want the other end point and release the mouse.

Two arrows are shown in the centre of the track, click on them and drag to adjust the angle of the curve.

Once the curve is created you can join it to neighbouring tracks using Connect Two Tracks as we did in part one.

Editing Curves

Now that you have created your curves you may find that they need a bit of ‘nudging’ into position.

This can be done it one of two ways. The first is to select the Modify button , then click an endpoint and drag it around.

The other is to click on the curve to bring up the ‘Describe Curve’ window. If neither end of the curve isconnected to another track, you will have options at the bottom to select the Pivot - which point will remain fixed. If one end is connected, the pivot will be at that end. (If both ends are connected you can’t edit the curve - you will have to break one or both of the connections first).

Most of the options in the window are fairly obvious. There are options to adjust the position and radius. If the track has an Angular length of 90 degrees, then it is a 90 degree bend, 45 degrees is a 45 degree bend and so on. I’ll admit to having no idea what the CW and CCW options do. Their behaviour seems non obvious and I can’t find anything about them in the documentation. As far as I can tell they relate to creating easements.

You can also make adjustments using the mouse as shown previously for straight track. Select the track, right click and choose Modify, then click and drag to adjust the radius and length.

Parallel Tracks

A useful feature for creating double track lines, as well as parallel lines in stations and sidings is Create a Parallel Track. With it selected click beside an existing track section and a parallel piece of flexitrack will be created to that side of it.

To create a longer length of parallel track,just keep alternernately clicking the parallel track button and next to a piece of flexible track. The new tracks will be automatically joined together.

Note however, that you can only create parallel tracks next to pieces of flexible track, but you can use ‘join tracks’ to link section together.

Here’s an example of how to use it too create a passing loop. Start with two turnouts, connected by a piece of straight track.

Select Create a Parallel Track and click just below the straight track.

The new track will be the same length at the original, and impossible to connect the them so we need to shorten it.

Click Select and click the new parallel piece of track to turn it red. Right click on the track and select Modify. Now click on one end and drag it shorter such that a curve to the turnout will fit in nicely. Repeat this for the other end.

Now to join the track to the points. Select Join Two Tracks, click on one end of the new track. Click and hold on the neighbouring turnout and drag the mouse until the joining track shows black. Again repeat this for the other end.

This technique can obviously be used for sidings by just connecting one end.

Summary

I’ve now covered just about all the basic track laying and editing features. There are a couple of advanced features which I haven’t had time to cover. These include:

• Easements (also called transition curves). Use these to create gentle lead ins to curves, as used on the real railways.
• Layers. You can use layers to divide your layout into separate sections. XtrkCad can then hide or show individual layers. This is particularly useful for layouts with gradients and multiple levels.
• Gradients and levels. This feature is pretty much self explanatory. Use it where, for example, one track passes over another.
• Run Trains. XTrkCad includes the option to add locomotives and cars to the layout and run them as if you where using a physical layout. You can use this to test out the design, or simply as a way to ‘play trains’ without having to build a real layout.

All these features and more can be found in the online help, which is installed with the software.

I’ll leave them for you to experiment with, and maybe post some further articles on these features.

But for now I’ll leave you to dream up you fantasy layouts in XTrkCad.

See also:

Download XTrkCad
XTrkCad Tutorial Part 1: Getting Started
XTrkCad Tutorial Part 2: Editing Tracks
XTrkCad Tutorial Part 3: Flexible Track

]]> 2007-06-02T18:22:00+00:00 http://smallphry.com/eecore/index.php/site/xtrkcad_tutorial_part_3/ Articles So far I’ve shown how to use XTrkCad to design a layout using set track, but using flexible track offers a much wider scope in layout design.

Even though you are designing with flexitrack you will, of course also want to include points and other fixed trackage elements. These items are added in exactly the same way as the set track elements we used in parts one and two. XTrkCad makes it easy to mix fixed and set track items with flexitrack. Indeed, I usually start a design from a ‘fixed point’, such as a set of points, and work outwards either towards the end of the line, or to another fixed item, such as another set of points.

Extending Tracks

Once you have a piece of track on the layout, it’s easy to join flexible track on to it. Click the Modify button , then click and drag from one of the ends of the track piece. A section of straight track will be drawn. Release the mouse button to fix it. Now click Modify again, and shift-click on the end of the new section and you can drag the mouse around to turn it into a curve.

Straight Track

If you don’t already have any track in place on the layout, start by adding a set of points on which we can build from.

Click the Create Straight Track button, click near where you want the track to start (ie. the exit from the points) and drag the mouse to the other end. Now click Connect Two Tracks and click on the exit from the points and the end of the straight track to join them. (You may need to move or rotate the straight track slightly if you get an error message - see the previous article).

If necessary, you can adjust the length of the straight. Click the Modify button, click on the free end of the track and you can drag it to change the length.

Joining With Curves

Curves can be created in a similar way to the method descibed for straght track above, which we’ll come to in the next part, but it’s often simpler to use the ‘join tracks’ feature. This method can be used where the tracks can be joined by a ‘simple curve’, ie. one which uses a curve in a single direction (as opposed to using reverse curves).

Click the Join Two Tracks button, click on the end of one of the tracks to connect, then click and hold the mouse button down on the other end. A track will be drawn connecting the two end points. If the track is drawn in black (and you are happy with the curve drawn), you can release the mouse button. If the track is drawn in red, XTrkCad can’t find a way draw a track to that point. Move the mouse back toward the other end of the curve and the track should turn black. You can now release the mouse button to keep the new track.

Throughout the above, you can adjust the exact shape of the curve by moving the mouse around while keeping the mouse button held down.

Sometimes, no matter where you move the mouse, the curve stays red. This means that either a reverse curve is needed or the curve needed is too tight. (You can adjust the minimum radius from the Options/Preferences menu item). Also you may find that XTrkCad will not create the curve in the exact shape you want. If this happens you may need to either move one of the end points, draw a partial curve (or straight) and try again, or put some track down (either set track or flexitrack) as a centre point.

Our tour of XTrkCad is nearly over. There’s just one more feature to describe, creating curved flexible track, and I’ll cover that in the next part.

Inserting Track

You can insert a fixed track element (eg a set of points) into a piece of flexitrack (either curved or straight) by just dropping in onto the flexible track. Hold down shift and click to cycle through the different positions the point can be positioned in. When you are happy, press Enter.

See also:

Download XTrkCad
XTrkCad Tutorial Part 1: Getting Started
XTrkCad Tutorial Part 2: Editing Tracks
XTrkCad Tutorial Part 4: Curved Track

]]> 2007-06-02T18:13:00+00:00 http://smallphry.com/eecore/index.php/site/xtrkcad_tutorial_part_2/ Articles In part one we saw how to create a layout using XTrkCad and Set Track track items. We covered adding new items to the layout, but at some point you will almost certainly need to edit what you have already added either to add extra features to the layout or to correct mistakes.

On order to edit items, you first need to know how to select them. To put XTrkCad into select mode, click the Select Tracks button.


• To select a piece of track, click on it. It will turn red. Click it again to unselect.
• Click other pieces of track to select them also.
• To select a piece of track and every piece of track attached to it, hold the Shift key and click on it. All the attached tracks will turn red.

Tip: If you want to select everything except a few pieces of track, it may be quicker to shift-click to select everything and then click on individual pieces to unselect them.

Tip: If you want to edit a large subsection of the layout, eg. a set of sidings, it may be useful to separate them from the main tracks first. Click the Split a Track icon, then click on a joint between two track sections. This breaks the joint and you can now Shift-Click to select the sidings.

The operations described below, operate on all the currently selected pieces of track, even if they are not attached to the current track. They also affect selected tracks which are not even on screen.

To prevent accidental mistakes, it’s often best to make sure everything is unselected before moving to a new area. To do this, right-click and choose Deselect All.

To delete the selected track or tracks, press the Delete key, or right-click with the mouse and select Delete.

Tip: To undo a deletion (or any other change), click the Undo button towards the left of the toolbar.



To move the selected tracks, right-click and select Move, then click and drag the tracks to their new location.

Rotating the tracks is similar. Right-click and select Rotate. Then click-hold on the spot around which you want the track to rotate and drag the mouse to rotate the tracks.

Parts List


Before we move on to flexitrack, I’ll mention one more useful feature, the ability to create a shopping list of parts. Select the parts you want to price (or probably more usefully, Shift-click to select everything) and use the menu item File/Parts List. This shows how many pieces are required, but you can also get it to include prices.


Back out of the Parts List window and go to File/Price List. Scroll down and you can enter the prices from your local modelling emporium. At the bottom of the window is an option the enter the price of a length of flexitrack, where the first box is the length (in inches) of a section of track.

When purchasing just bear in mind that there will be a certain amount of wastage from offcuts of flexi-track, so you may want to buy an extra length or two.

With a little bit of practice you should soon be able to master evrythng we ave covered in parts one and two. Next time I’ll move on to designing layouts with flexible track.

See also:

Download XTrkCad
XTrkCad Tutorial Part 1: Getting Started
XTrkCad Tutorial Part 3: Flexible Track
XTrkCad Tutorial Part 4: Curved Track

]]> 2007-06-02T18:08:00+00:00 http://smallphry.com/eecore/index.php/site/xtrkcad_tutorial_part1/ Articles

XtrkCad is a useful piece of software for designing model railway designs, whether you are designing the layout you want to build, creating a fantasy layout, or simply experimenting with ideas to see ‘what will fit’. And the software is free, which is great for those on a budget.

This tutorial assumes you have already installed XTrkCad and followed the free registration procedure. If you haven’t, you can download it here.

Setting up the layout

When you start XTrkCad, it shows a blank screen with space for a small layout. This probably isn’t the same size as the layout you want to design, so on the menus select Options/Layout… Here you can specify the size of the layout in inches. If your layout uses an odd shape, or has an operating hole in the middle, enter the maximum dimensions of the layout area. In this window you can enter an optional title for the layout and you’ll also want to specify the scale/gauge you are using.


The screen will now show your layout area at the default scale. You will probably find that the layout area is larger than can be shown on screen. The XTrkCad Map window shows the area which is currently on screen in black. To move around the layout area, click on the black rectangle and drag it to the area you want to view. (If the Map Window isn’t showing, use the Window/Map Window menu item). You can also zoom in and out using the three buttons on the very left of the tool bar.

If your layout is an odd shape, or includes an operating area, you can draw lines and boxes to show where the edges of the baseboard will be. Use the drawing tools on the right hand area of the toolbar. These tools are pretty intuitive to use, just click-hold at one end/corner and drag the mouse to the other end/corner, zooming in and out as necessary.

Adding track sections


XTrkCad is preprogrammed with a large number of trackage systems. To select the one you want to use, right click on the track icon bar and select from the list. You can use the left/right buttons on the track icon bar to select which items are shown and also to scroll between track systems. There are also items on the list for trees and trackside structures. I’ll start this tutorial by selecting Peco SetTrack (’Peco N Scale ST-Track’ ) , since the fixed track pieces of set track are easier to design with when you are new to XTrkCad. I’ll move on to flexitrack in a later article.

Hover the mouse over a track item on the track icon bar and it’s name is displayed. I’ll start with a left hand point. Click the icon to select it, and the icon turns black. Click anywhere within the layout to place it down. Note that at this stage it is not ‘fixed’. If it is in the wrong place, click closer to where you want it and it will move.

You can also rotate it: click and hold the right mouse button at the location on the track item about which you want to rotate it. Move the mouse to rotate it, drag the mouse further from the rotation point to make finer adjustments. Once it has been rotated, you can, if necessary, click and drag the track item about the layout to it’s final position.
When you are finally happy with it’s position, press the Enter key to fix it in position (but bear in mind that it can still be moved later).

To add the next track item, again click on it in the track icon bar. This time, click near one of the ‘exits’ from the first track item, and it will be joined on (but the end of the second piece which attaches appears to be pre-set and can’t be changed).

If the end that is joined by default is wrong, click somewhere else nearby to separate the items, right-click and rotate the new item, then left-click and drag it close to where it will be attached and press the Enter key to fix it.

To join the items, click the ‘Connect Two Tracks’ icon , click the end of one track section, then click the end of the second item. If you get a message about the ends being too far apart, move and/or rotate one of the items and try again (see part two for details).

If you make a mistake connecting tracks, select ‘Split a Track’, and click on the joint to separate them.

The rest of the design is a simple process of moving around the layout one track section at a time until all the track pieces are done. Just remember that you have to press Enter to fix each item in place before moving on to the next one.

In this part we’ve seen how to lay tracks, next time we’ll look at how to edit the pieces we have already laid.

See also:

Download XTrkkCad
XTrkCad Tutorial Part 2: Editing Tracks
XTrkCad Tutorial Part 3: Flexible Track
XTrkCad Tutorial Part 4: Curved Track

]]> 2007-06-02T17:59:00+00:00